TOSHIBA SHORAI R32 INVERTER

This new modern design creates fresh air to better the quality of life with less energy consumption, and easier to control with just one touch. This sleek hi-wall heat pump offers maximum comfort down to -15 degrees, guaranteeing outstanding heating performance whatever the weather.

R32 Refrigerant
Sleek Modern Design
Eco-Friendly
Magic Coil and Self-Cleaning
Smart Airflow

INSTALLATION

This unit is sold including a basic back-to-back installation. This means the indoor unit must be mounted on an inside wall with the outdoor unit mounted on the ground or a wall bracket directly behind. Back-to-back installation requires an allowance of 3 metres of pipe work and up to 15 meters of electrical cable from the source of supply.

MAKE AN ENQUIRY

PRICING (Includes Installation)

Inverter Hi-Wall 2.0/2.5kW R32: $1,700.00 +GST

Inverter Hi-Wall 2.5/3.2kW R32: $1,790.00 +GST

Inverter Hi-Wall 3.5/3.7kW R32: $1,900.00 +GST

Inverter Hi-Wall 4.2/5.4kW R32: $2,305.00 +GST

Inverter Hi-Wall 4.8/5.8kW R32: $2,195.00 +GST

Inverter Hi-Wall 6.0/6.9kW R32: $2,356.00 +GST

Inverter Hi-Wall 7.1/8.0kW R32: $2,556.00 +GST

MAKE AN ENQUIRY

15A Plug

Allow 15A switched socket only with new wiring back to switchboard (Max 20m)

This option must be installed outside zone 1 –no closer than 1.25m from edge of spa

• PDL 15A weatherproof switched socket IP53

• Supply and Install new circuit back to switchboard

• Provision for RCD in switchboard

• Test & liven socket outlet

• Spa delivered with 15a plug installed so you can plug and play yourself

$685 +GST*

15A Hard-Wired

Allow to hard wire spa pool via external conduit into 15A fixed Isolator, with new wiring back to switchboard (Max 20m). This option is the safest and can be installed within zone 1 – so isolator can be as close as practical

• Waterproof 15A isolator IP55

• Supply and Install new circuit back to switchboard

• Allow to run conduit from isolator down and into spa (1m max away from wall)

• Provision for RCD in switchboard

• Connect, test & liven

$840 +GST*

25/32A Hard-wired

Allow to hard wire spa pool via external conduit into 32A fixed Isolator, with new wiring back to switchboard (Max 20m). This option is the safest and can be installed within zone 1 – so isolator can be as close as practical

• Waterproof 32A isolator IP55

• Supply and Install new circuit back to switchboard

• Allow to run conduit from isolator down and into spa (1m max away from wall)

• Provision for RCD in switchboard

• Connect, test & liven